Many factory workshops have been in production, so needDust collectorIt can also work continuously, but for a long time in the working state, the vacuum cleaner is prone to excessive temperature, and if it is not handled in time, it is easy to lead to equipment failure. What method is there to cool the equipment？

    Method 1: The hose dust bag interface is blocked: When the dust bag interface is blocked, you need to disassemble the device in time, dredge the hose, and clean the blockage at the suction nozzle and suction nozzle. If it is blocked for a long time, the temperature of the vacuum cleaner will be too high。

    Method 2, the filter is blocked seriously: the filter of the vacuum cleaner is blocked more seriously, which will not only affect the vacuuming effect, but also lead to the temperature increase of the vacuum cleaner in the work, it is necessary to clean up in time and pay regular attention to the cleaning of the filter。

    Method 3, the seal is not tight: check whether there is a tight seal between the top cover and the body of the vacuum cleaner, and tighten the screws in time;The gap between the motor and the equipment is large, the screws and gaskets around the motor are loose, and they should be strengthened in time, and it should be replaced in time when the gasket is defective。

    In general, the vacuum cleaner used in the factory workshop can work continuously, when the temperature is too high in the process of use, it is necessary to check whether the equipment is faulty, timely maintenance, to avoid small problems leading to major failures。

Some pictures are reproduced from the network, copyright belongs to the original author, if there is infringement please contact us to delete